188 Storage: climate-controlled storage and boat, RV and vehicle parking

How to use our free trailer dolly

Tenants and U-Haul customers can borrow our trailer dolly at no charge to move a trailer by hand, whether you're backing a boat into your space or lining up a U-Haul trailer to load.

Free-to-use trailer dolly with hitch ball parked by the office at 188 Storage, with a U-Haul trailer behind it

Questions? We’ll text you back.

Leave your cell number. Someone from our office texts you back, usually within an hour (Mon–Sat 9–6). Ask about sizes, prices, what fits or anything else.

We only use your number to answer you. Message and data rates may apply. Prefer to call? 361-722-0101.

The dolly lives by the office. Please return it there when you're done.

Before you start

  • Check the weight. The dolly is for trailers you could push by hand on level ground. If it takes more than one person to move the tongue, ask us first.
  • Check the ball size. The size is stamped on top of the hitch ball. It must match the size stamped on your trailer's coupler.
  • Bring a helper for anything bigger than a small utility trailer. One person steers, one watches the corners.
  • Wear closed-toe shoes and gloves, and keep feet clear of the wheels.
  • Stay on flat ground. Never use the dolly on a slope or to move a trailer with anyone inside it.

Step by step

  1. Chock the trailer wheels

    Put wheel chocks in front of and behind a trailer tire so it can't roll while you hook up.

  2. Raise the tongue

    Crank the trailer's tongue jack until the coupler sits a few inches higher than the dolly's hitch ball.

  3. Roll the dolly under the coupler

    Line the ball up directly under the coupler.

  4. Lower the coupler onto the ball

    Crank the jack down until the coupler seats fully on the ball. Close the latch and put the safety pin in.

  5. Hook up the safety chains

    Cross the trailer's safety chains and hook them to the dolly frame.

  6. Raise the tongue jack all the way

    The dolly now carries the tongue. Make sure the jack foot is well clear of the ground.

  7. Remove the chocks and move slowly

    Push down on the handle to take the weight, then walk the trailer at a slow pace. Use the foot plate for leverage when you start or stop. Turn wide, and have your helper call out the corners.

  8. Park and chock again

    Stop in position, chock the wheels, then lower the tongue jack onto a pad or block until it takes the weight.

  9. Unhook

    Unhook the chains, remove the pin, open the latch and crank the jack up until the coupler lifts off the ball.

  10. Return the dolly

    Roll it back to its spot by the office so the next customer can use it.

Loading a U-Haul trailer

Unhook the U-Haul trailer from your vehicle, use the dolly to line it up by your unit or the loading dock, then load it. Put the heaviest items in front of the trailer's axle, about 60% of the weight in front, and tie everything down before you hook back up to your vehicle. Rent a U-Haul trailer here.

Video walkthrough

A short video showing each step is coming soon. Questions? Call or text 361-722-0101, Mon–Sat 9 am to 6 pm, closed Sunday.

Use of the dolly is at your own risk. Please report any damage to the office.

Parking from $50 a month. Climate-controlled from $65. First month free with 6 months.